We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

How to Knit a Hat with Circular Knitting Needles: A Step-by-Step Guide

Learn how to knit a hat with circular knitting needles, from casting on and working in the round to shaping the crown. A clear guide for beginners.

Updated November 2026

Knitting a hat with circular knitting needles is one of the most satisfying beginner projects, because you work in the round and never have to seam the sides. In this guide, you will cast on, knit a ribbed brim, work the body in the round, and shape the crown into a finished hat. A standard adult hat takes a few evenings with worsted-weight yarn.

What You Need Before You Start

Choose a circular needle with a cable length shorter than the circumference of your hat. A 16-inch cable works well for most adult sizes, and a 24-inch cable is helpful if you have a larger head or want more room for the stitches. You will also need a set of double-pointed needles or a second circular needle for the crown shaping, a stitch marker, a tapestry needle, and about 150 to 200 yards of worsted-weight yarn. For more on cable lengths, see Circular Knitting Needles 12 Inch: How to Choose the Right Length (2026) and 16 Inch Circular Knitting Needles: How to Choose and Use Them (2026).

Shopping for one? See our guide: 6 Best Circular Needles for Knitting Hats (2026).

Step-by-Step: Knitting the Hat Body

  1. Cast on. Using a stretchy method such as the long-tail cast-on, cast on 88 stitches for an average adult hat with worsted yarn and a US 8 (5 mm) needle. Make sure the stitches are not twisted around the cable.
  2. Join in the round. Place a stitch marker and join without twisting the cast-on edge. Confirm the marker is in place before you knit the first round.
  3. Work the brim. Knit 1, purl 1 ribbing for about 2 to 3 inches, or until the brim is as deep as you like. Ribbing helps the hat stay snug on the head.
  4. Knit the body. Switch to stockinette stitch by knitting every round. Continue until the hat measures about 6 to 7 inches from the cast-on edge, or slightly shorter than your planned total height.

How to Shape the Crown

The crown is where the flat disc of the hat is created. Divide the stitches into quarters using stitch markers, then decrease at each marker on alternating rounds. Knit to two stitches before each marker, knit those two stitches together, and repeat. Decrease every other round, then every round, until about 8 to 12 stitches remain. As the stitch count drops, the cable may become too long for comfort, so switch to double-pointed needles or a shorter circular needle, such as a 9-inch cable, when you need to. For guidance on that switch, see 9 in Circular Knitting Needles: How to Choose the Right Length and Cable.

Finishing the Top

Cut the yarn, leaving a tail about 8 inches long. Thread the tail onto a tapestry needle, pass it through the remaining stitches, and pull tight. Weave in the ends on the inside of the hat, and you are done.

Tips for Working in the Round

Working in the round is more forgiving than flat knitting once you learn the rhythm. To keep your circular needle comfortable, follow the basics in How to Use Circular Knitting Needles: A Step-by-Step Guide for Beginners. For a faster start, the technique is also covered in Circular Knitting Needles How To: A Step-by-Step Guide for Beginners.

  • Check that the cast-on edge is not twisted before you join the round.
  • Use a stitch marker at the start of each round so you do not lose your place.
  • Try on the hat often, since gauge varies between knitters.
  • Keep the cable smooth and flexible, and avoid stretching the stitches too far.

Common Mistakes to Avoid

  • Twisted cast-on. A twist in the join makes the hat look lopsided, so check before you knit the first round.
  • Stitches stretched on a long cable. Pull the tension gently and keep the stitches evenly spread.
  • Crown decreases that are uneven. Keep the markers in the same spot so each section matches.
  • Skipping the gauge swatch. Stitch count depends on your tension, so adjust the cast-on if the hat is too big or small.
  • Clover Takumi bamboo circular needles: Bamboo grips the yarn well, which helps keep stitches steady on a hat. View on Amazon
  • Stitch markers: Locking markers keep the round divisions clear during crown shaping. View on Amazon
  • Tapestry needle: A blunt-tipped needle makes weaving in ends and closing the crown quick. View on Amazon

FAQ

What size circular needle should I use for a hat?

Most adult hats use a 16-inch cable with a US 7 to US 9 needle, depending on the yarn weight. Check the gauge on your yarn label and adjust the needle size to match.

How many stitches should I cast on for an adult hat?

A common starting point for worsted yarn is 88 stitches, but gauge matters more than the number. Knit a small swatch and measure it before you cast on.

Can I knit a hat on a circular needle without double-pointed needles?

Yes. A shorter circular needle, such as a 9-inch cable, can handle the crown for most hats, so you may not need double-pointed needles at all.

Conclusion

Knitting a hat with circular knitting needles comes down to a stretchy cast-on, a ribbed brim, a plain body, and a steady crown decrease. Once you have made one, you can change the stitch count or yarn weight to make hats for everyone you know. Keep the cast-on untwisted, and try the hat on as you go.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our knitting guides, checking product details against manufacturer specifications and owner feedback.

About the author

Audrey Hayes
Audrey Hayes

Audrey Hayes writes reviews and buying guides for Passion Knit.