We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Knitting in the Round on Two Circular Needles: A Step-by-Step Guide

Learn knitting in the round on two circular needles with the two-needle method, from casting on to joining the round without twisting. Clear steps for beginners

Updated November 2026

Knitting in the round on two circular needles means working a seamless tube on a single cable, with the stitches split between the two needle tips. Once you understand the rhythm, you can knit hats, socks, cowls and sleeves without ever sewing a seam. This guide walks through setup, joining the round, and keeping your work tangle-free.

What You Need Before You Start

Choose a circular needle with a cable short enough that the stitches stretch comfortably without pulling. For a small project like a hat, a 16-inch cable is a common starting point, while a 24-inch or 32-inch cable suits larger pieces. For a deeper look at picking lengths, see Longest Circular Knitting Needles: Lengths, Uses and How to Choose.

Shopping for one? See our guide: 7 Best Fixed Circular Knitting Needles of 2026: Buyer's Guide.

  • A circular needle with two tips joined by a flexible cable
  • Yarn in the weight your pattern specifies
  • A stitch marker to flag the beginning of the round
  • A tapestry needle for weaving in ends

Casting On and Dividing the Stitches

Cast on the number of stitches your pattern calls for, then check that they all sit on the cable with none twisted. Slide the stitches so that half sit on one needle tip and half on the other. Hold the working yarn at the right-hand needle, which is the one you will knit from first.

  1. Cast on all stitches onto one needle tip.
  2. Slide them along the cable so the stitches sit evenly on the cable, with the tail near the right tip.
  3. Place a marker after the last stitch on the left needle to mark the start of the round.
  4. Check the cast-on edge from the outside. Each stitch should face the same direction, with no twists.

Joining the Round Without Twisting

The most common problem when knitting in the round on two circular needles is a twisted join. Before you knit the first stitch, make sure the cable lies flat and the cast-on edge forms a loop with the needle tips pointing away from you. Then knit the first stitch from the left needle onto the right needle, and continue around. Pull the working yarn firmly on the first few stitches to close any gap at the join.

If you find a twist, slip the stitches off the needles, untwist the cast-on edge, and start again. It takes a few seconds and saves hours of unpicking later.

Working Around the Tube

Once the round is joined, knit all the stitches on the left needle, then turn your attention to the stitches on the right-hand cable. Because the tips point toward you, you will be working the stitches in the same direction every round. Keep the marker at the start of each round, and slide it along as you knit the stitch it sits beside.

Managing the Cable

As the work grows, the stitches will move onto the cable and the tube will get heavier. Let the work hang loose between rounds, and pull gently on the cable so the stitches slide smoothly rather than bunching. For a closer look at project-specific sizing, Knitting in the Round with Circular Needles: A Step-by-Step Guide covers the basics in more detail.

Tips for Smooth Knitting in the Round

  • Check for twists every few rounds, especially after you add stitches.
  • Use a stitch marker at the start of each round, and move it up as you go.
  • Tug the working yarn gently at the join to close the gap between the first and last stitches.
  • If the cable pulls the stitches too tightly, switch to a longer cable.

Common Mistakes

Most problems come from twisted joins, cables that are too short for the stitch count, or forgetting the marker. Working on a cable that is too short makes the stitches stretch and the fabric look uneven. Forgetting the marker means you lose track of where the round begins, which often shows up as a jog in the pattern.

  • Stitch markers: Clip-on markers make it easy to flag the start of each round, and they slide along the work without snagging. View on Amazon
  • Tapestry needles: A blunt-tipped needle with a large eye helps you weave in ends neatly once the tube is finished. View on Amazon

FAQ

Do I need two circular needles to knit in the round?

No. A single circular needle with a long enough cable works well for knitting in the round. The two-needle method is useful when you want to work small circumferences, such as socks or sleeves, on a cable that would otherwise be too stretched.

How do I stop the stitches from twisting at the join?

Lay the cable flat before you knit the first round, and check the cast-on edge from the outside. A quick inspection before you start the first round prevents most twists.

Where should the stitch marker go?

Place it after the last stitch of the round, on the left needle, before you begin knitting. Move it up at the start of each new round so you always know where the round begins.

Conclusion

Knitting in the round on two circular needles becomes natural with a few rounds of practice. Check your join, keep the cable smooth, and mark the start of every round. With those habits in place, you can move on to hats, socks and larger seamless projects with confidence.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our knitting guides, checking product details against manufacturer specifications and owner feedback.

About the author

Audrey Hayes
Audrey Hayes

Audrey Hayes writes reviews and buying guides for Passion Knit.