We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Circular Knitting Needles Sizes Chart: US, Metric and Mm Equivalents

Use this circular knitting needles sizes chart to match US, metric and UK sizes, plus cable lengths, so your next project gauge and fit come out right.

Updated November 2026

A circular knitting needles sizes chart shows how needle diameter is labeled in the US, metric and UK systems, so you can match a pattern’s requested size to the pair in your stash. Once you can convert between systems and know what the cable length should be, you can buy or substitute needles with confidence. This guide walks you through reading the chart and choosing the right size for your project.

Understanding Circular Knitting Needle Size Systems

Circular needles are sized in three common systems. US sizes are whole numbers and half-sizes, running from 0 (2 mm) up to 50 (25 mm), and they are the ones most patterns written in America use. Metric sizes are given in millimeters, often in 0.5 mm steps at the fine end. UK sizes are older numbering that runs in the opposite direction from US sizes at the larger end, so a larger UK number means a smaller needle.

Shopping for one? See our guide: Top 5 Interchangeable Circular Knitting Needles with Multiple Sizes (2026).

The most useful reference point is the millimeter measurement, because it is the same everywhere. If a pattern gives only a US size and you have metric needles, convert to millimeters first and then match.

Circular Needle Size Chart: US, Metric and UK

The table below covers the sizes knitters use most often. Always check the diameter printed on your needle, since manufacturers may round slightly differently.

US Size Metric (mm) UK Size
0 2.0 14
1 2.25 13
2 2.75 12
3 3.25 10
4 3.5 —
5 3.75 9
6 4.0 8
7 4.5 7
8 5.0 6
9 5.5 5
10 6.0 4
10.5 6.5 3
11 8.0 0
13 9.0 00
15 10.0 000

Note that the UK and metric columns do not line up exactly at every size, and some sizes have no clean UK equivalent. For that reason, use millimeters as the final check. Embroidery Machine Needles Sizes (2026): Which Should You Choose? goes further into this.

Choosing the Right Size for Your Project

Needle size is only half of the decision. The pattern’s stated gauge (stitches and rows per 4 inches, or 10 cm) tells you what needle to use to get the fabric the designer intended. Knit a gauge swatch in the stitch pattern, measure it, and change needle size if your stitches are too tight or too loose.

  1. Find the gauge and needle size listed in the pattern.
  2. Knit a 4-inch (10 cm) swatch on the recommended needle, at least 6 inches square.
  3. Wash and block the swatch the way you plan to treat the finished item.
  4. Count stitches and rows over the middle 4 inches.
  5. If you have too many stitches per inch, go up one needle size; if you have too few, go down.

Matching Cable Length to Your Project

The needle’s size tells you the diameter, but the cable length determines whether the project fits on the needle. Cables commonly come in 16, 24, 32, 40 and 47 inches, and longer lengths for blankets. A good rule is that the cable should be shorter than the total stitch count of the piece you are knitting, so the stitches can be stretched comfortably without pulling. For a hat, a short 16-inch cable works well, while a sweater body may need 32 or 40 inches.

Common Mistakes

  • Trusting a converted size without checking the actual millimeter diameter on the needle.
  • Skipping the gauge swatch because the needle size “should” be right.
  • Choosing a cable that is too short, which makes stitches stretch and can pull them out of shape.
  • Mixing up UK numbering, where larger numbers mean smaller needles.
  • Measuring gauge before blocking, which can give a misleading result.
  • A metal or plastic needle gauge, which lets you check diameter directly rather than trusting the printed label. View on Amazon
  • A set of interchangeable circular needles, so you can swap cables and tips without buying a whole new pair. View on Amazon
  • A stitch marker set, which helps you keep track of pattern repeats and the start of each round. View on Amazon

FAQ

What does a US size 8 circular needle measure in millimeters?

A US size 8 needle is 5.0 mm in diameter. Always confirm with a needle gauge, because labels can vary slightly between brands.

Is a larger UK number a bigger needle?

No. UK sizes run in reverse at the larger end, so a higher UK number means a smaller needle. Convert to millimeters to avoid confusion.

Can I use a different cable length than the pattern calls for?

Yes, as long as the cable is long enough to hold your stitches without stretching them. Shorter cables suit small projects like hats, while longer cables fit larger pieces.

Conclusion

A circular knitting needles sizes chart is most useful when you read it in millimeters and then confirm with a gauge swatch. Match the cable length to the size of your project, and convert between US, metric and UK labels whenever a pattern uses a different system. With those checks in place, your finished piece should come out the size and fabric the pattern intended.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our knitting guides, checking product details against manufacturer specifications and owner feedback.

About the author

Audrey Hayes
Audrey Hayes

Audrey Hayes writes reviews and buying guides for Passion Knit.