We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Bernat Premium Acrylic Yarn: A Knitter’s Guide to Choosing and Using It

Learn how to choose, knit with, and care for bernat premium acrylic yarn, including weight options, needle sizing, gauge tips, and common mistakes to avoid.

Bernat Premium Acrylic Yarn is a widely available, budget-friendly acrylic line that many knitters reach for when they need soft, washable yarn in a range of weights and colors. In this guide, you will learn how to pick the right weight for your project, match needle sizes to get accurate gauge, handle the yarn so it knits up evenly, and avoid the mistakes that cause frustration later. Whether you are making a first hat or a full-size blanket, these steps will help you get the most from the yarn.

What Bernat Premium Acrylic Yarn Is Good For

Acrylic is a synthetic fiber, and the appeal of a line like bernat premium acrylic yarn comes down to a few practical traits. It is machine washable and dryer-friendly in most cases, it resists moths and mildew, and it holds color well across a large palette. It is also generally lightweight in feel for its warmth, which makes it a sensible choice for baby items, home decor, and gifts that will be laundered often.

Shopping for one? See our guide: 7 Best Worsted Weight Acrylic Yarns for Crochet Projects (2026).

Acrylic does have limits. It does not have the drape of wool, and it can look flat or slightly plasticky in stitch definition if you knit very tightly. Many knitters also find that acrylic pills over time with heavy wear. Knowing these strengths and weaknesses up front helps you decide whether this yarn suits a specific project. For a broader comparison, see Acrylic vs Cotton Yarn: Which Should You Choose? and Polyester Yarn vs Acrylic Yarn: Which Is Better for Your Projects?

Step 1: Choose the Right Weight

Bernat offers its premium acrylic in several weight categories. The weight determines the needle size, the stitch count per inch, and the amount of yarn your project will consume. Check the yarn label for the weight category, which is usually given as a number from 0 (lace) to 7 (jumbo) using the Craft Yarn Council system.

  • Worsted (weight 4): The most common choice for sweaters, scarves, hats, and general-purpose projects.
  • Bulky (weight 5): Good for quick hats, cowls, and blankets where you want warmth without a lot of stitches.
  • Lighter weights (DK or sport, weights 2 and 3): Better for delicate garments and baby items, though these take longer to knit.

If you are new to choosing weights, Medium Weight Acrylic Yarn for Crochet: A Step-by-Step Guide for Beginners explains the category system in more depth. For bulky-weight projects, you may also find Top 8 Bulky Weight Acrylic Yarn Picks for Cozy Projects useful.

Step 2: Match Your Needles and Check Gauge

The yarn label usually lists a recommended needle size and gauge (stitches and rows per 4 inches). Treat these as starting points, not rules. Your tension is personal, and two knitters using the same needle can produce noticeably different fabric.

  1. Cast on 20 to 25 stitches and knit a swatch of at least 5 inches square using the recommended needle size.
  2. Block the swatch the way you plan to treat the finished item. Acrylic usually responds well to a light steam or a quick wet block, then laying flat to dry.
  3. Measure the stitches and rows over a 4-inch span in the center of the swatch, avoiding the edges.
  4. If you have too many stitches per inch, your fabric is tight; go up one needle size. If you have too few, go down one size.
  5. Repeat until your gauge matches the pattern. Do not skip this step for garments, since a small gauge error can change the finished size by several inches.

Needle Types to Consider

Straight needles work well for flat pieces like scarves and blankets. Circular needles are better for hats, sweaters worked in the round, and any project with a large number of stitches, because the weight is spread across the cable. Bulky projects often look best on a slightly longer circular so the stitches do not stretch over the tips.

Step 3: Prepare the Yarn Before You Start

Skeins from big-box stores are often wound tightly. Before knitting, take a few minutes to prepare the yarn properly.

  • Remove the paper band and any ties, and keep the label so you can check the dye lot.
  • If the skein is very tight, gently roll it between your palms or hang it over a chair back to loosen the twists.
  • Check every skein in a project for dye lot numbers. Acrylic dye lots can vary slightly, and mixing them in one item can show up as a visible band.
  • Wind the yarn into a center-pull ball if it is prone to tangling, which is common with some acrylic skeins.

Tangling and sticky strands can also come from storage conditions, and the same handling tips apply to acrylic yarn on cones. If that is a problem for you, Acrylic Yarn on Cones: Why It Sheds, Tangles and How to Fix It covers the causes.

Step 4: Knit With Consistent Tension

Acrylic is forgiving, but it does not hide uneven tension as well as you might hope. Keep these habits in mind:

  • Hold the yarn the same way for the whole project, whether over your index finger or through your fingers.
  • Do not pull each stitch tight just to finish it; let the needle size set the stitch size.
  • Check your work every few inches, especially at color changes or where you start a new ball.
  • Stop and take a break if your hands feel strained. Consistent work depends on relaxed hands.

If you are working with variegated or self-striping colorways, uneven pooling can look like a tension problem but is actually a yarn behavior. Our explainer on Why Does Self Striping Acrylic Yarn Pool or Stripe Unevenly? Causes and Fixes walks through how to tell the difference.

Step 5: Finish and Care for the Project

Blocking acrylic is different from blocking wool. Most acrylic relaxes best with a light steam held just above the surface, or a gentle wet block followed by flat drying away from direct heat. Avoid high iron heat, which can melt or flatten the fibers. Weave in ends securely, and check the care label before washing the finished item.

Common Mistakes

  • Skipping the swatch. Gauge errors are the most common reason garments come out the wrong size.
  • Mixing dye lots. Even small differences can show as stripes, especially in large solid areas.
  • Using a high iron heat. Acrylic can scorch or become stiff. Steam from a distance instead.
  • Knitting too tightly to “fix” a pattern. This makes the fabric stiff and can distort the stitch definition.
  • Expecting wool-like warmth or drape. Acrylic is practical, not luxurious; choose it for what it does well.

A few supplies make working with bernat premium acrylic yarn more pleasant and help you hit gauge reliably.

  • Circular knitting needles in your chosen size: A flexible cable helps with hats and larger pieces, and the stitches slide smoothly on most acrylic. View on Amazon
  • A stitch gauge ruler: A clear ruler with a stitch counter lets you check gauge quickly without guessing. View on Amazon
  • A yarn swift and ball winder: These help you wind skeins into even balls, which reduces tangles and keeps tension smoother. View on Amazon
  • A fabric shaver: Useful for removing pills that form on acrylic garments over time. View on Amazon

FAQ

Is bernat premium acrylic yarn machine washable?

Most acrylic yarns, including the Bernat acrylic lines, are labeled as machine washable and dryer-safe on a gentle or low setting. Always check the label on your specific skein, since care instructions can vary by product.

What needle size should I use with bernat premium acrylic yarn?

Use the size listed on the yarn label as your starting point, then knit a swatch to confirm gauge. Your tension may call for a size up or down.

Does acrylic yarn pill?

Acrylic can pill with repeated wear and friction, especially in areas like underarms and cuffs. A fabric shaver can remove pills, and choosing a tighter knit can slow the process.

Can I mix dye lots of bernat yarn in one project?

It is best to avoid mixing dye lots. Buy all the yarn you need at once, and check the dye lot number on each skein before you start.

Is this yarn good for baby projects?

Acrylic is a common choice for baby items because it is soft enough, washes well, and is typically labeled suitable for frequent laundering. Check the item for loose parts and choose a smooth finish for comfort.

How do I block acrylic yarn?

Use a light steam held just above the fabric, or wet block by soaking briefly, pressing out excess water, and laying flat to dry. Avoid high iron heat.

Why does my acrylic project look stiff?

Stiffness usually comes from knitting too tightly or from using a needle that is too small. Try a larger needle, and check that your tension is relaxed.

Conclusion

Bernat premium acrylic yarn is a practical, washable choice that suits many everyday projects. Choose the weight that fits your pattern, knit a gauge swatch, handle the yarn carefully to avoid tangles and dye lot problems, and block gently. With these habits, you can get consistent, long-lasting results from your knitting.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our knitting guides, checking product details against manufacturer specifications and owner feedback.

About the author

Audrey Hayes
Audrey Hayes

Audrey Hayes writes reviews and buying guides for Passion Knit.