We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Circular Knitting Needles 4mm 40cm: How to Choose and Use This Size

Learn how to choose circular knitting needles 4mm 40cm for hats, socks and small projects, with cable length tips and common mistakes to avoid.

Updated November 2026

Circular knitting needles 4mm 40cm are a versatile pairing: a US 6 needle with a 16-inch cable that suits hats, cowls, socks worked on two circulars, and small in-the-round projects. This guide shows you how to confirm the size, pick the right cable length, and set up your first project so the work moves smoothly.

What 4mm and 40cm Actually Mean

The 4mm figure refers to the needle tip diameter, which determines stitch size. In the US system this is roughly a size 6, though the conversion is approximate and some yarn labels list a different metric size. The 40cm figure is the cable length, measured from the tip of one needle to the tip of the other, which is about 16 inches. A 40cm cable is short enough to keep hats and small cuffs manageable, yet long enough for most socks worked using the two-circular method.

Shopping for one? See our guide: 7 Best Fixed Circular Knitting Needles of 2026: Buyer's Guide.

How to Choose Between 4mm and Nearby Sizes

Start with your gauge swatch. Knit a 4-inch square in the stitch pattern you plan to use, then compare your stitch count to the pattern gauge. If you have too many stitches per inch, your fabric will be dense and stiff, so move up a size. If you have too few, move down. Use the table below to match common projects to this needle size.

Project Fit with 4mm / 40cm Notes
Hat (adult) Good Cable keeps stitches from stretching around the crown
Cowl or neckwarmer Good Work the join carefully to avoid twists
Socks (two circulars) Good Use a longer cable for larger feet
Sweater body Poor Cable is too short for most body circumferences
Blanket Poor Choose a longer cable instead

If you are planning a larger piece, read What Size Circular Knitting Needles for Sweater Projects: A Step-by-Step Guide before you buy a second cable. For a closer look at hat sizing, see What Size Circular Knitting Needles for Hat: How to Choose the Right Pair.

Setting Up Your First Project

Follow these steps to start a project on 4mm, 40cm needles:

  1. Cast on your stitches loosely onto one needle tip, keeping the cable below the work.
  2. Check that the cast-on edge is not twisted around the cable before joining.
  3. Place a stitch marker after the last stitch to mark the start of the round.
  4. Join by knitting the first stitch, pulling the working yarn snug to close any gap.
  5. Knit one round and check again for twists before you continue.

For more on the basic technique, see Using Circular Knitting Needles: A Step-by-Step Guide for Beginners.

A set of stitch markers that clip onto the cable makes it easier to track round beginnings. A soft zippered pouch or a tangle-free storage bag keeps the cable from kinking between sessions. Look for a stitch marker set and a needle case, and check the product details before buying.

Common Mistakes

  • Joining without checking for twists, which can produce a Mobius-style fabric you need to undo.
  • Pulling the cable too tightly against the stitches, which can cause uneven tension.
  • Using this size for a sweater body without measuring the circumference first.
  • Skipping the gauge swatch and assuming the pattern will fit.

FAQ

Is 4mm the same as US 6?

Yes, in most cases 4mm corresponds to a US size 6, but the conversion is approximate. Check the needle package or your yarn label when the size is unclear.

Can I knit socks on a 40cm cable?

Yes, using the two-circular or magic loop method. The cable is short, so you may need to stretch the stitches more often for larger feet.

What happens if my gauge is off?

Switch to a needle one size up or down and knit another swatch. Changing needle size is the most direct way to adjust gauge without changing the yarn.

Conclusion

Circular knitting needles 4mm 40cm work well for hats, cowls, and socks when you confirm your gauge and cable length first. Check your swatch, join carefully, and watch for twists in the first round. With those steps, this size becomes a dependable part of your needle kit.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our knitting guides, checking product details against manufacturer specifications and owner feedback.

About the author

Audrey Hayes
Audrey Hayes

Audrey Hayes writes reviews and buying guides for Passion Knit.