We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Will Acrylic Yarn Shrink? How to Tell and Prevent It

Will acrylic yarn shrink? Learn why it happens, how to test a yarn, and the safe washing and drying steps that keep your finished knits from shrinking.

Updated November 2026

Will acrylic yarn shrink? In most cases, a properly made acrylic will hold its size through normal washing, but heat, agitation and tension can all cause it to change. This guide explains why acrylic shrinks, how to check a yarn before you commit to a project, and the steps that keep your finished piece the size you knitted it.

Why Acrylic Yarn Shrinks

Acrylic is a synthetic fiber made from petroleum-based polymers. Unlike wool, it has no scales that lock together when agitated, so it does not felt. Shrinkage in acrylic comes from a different cause: the fiber’s molecular structure relaxes when it is exposed to heat, and the yarn can contract or lose its loft. Manufacturers often heat-set acrylic during production, which stabilizes it, but that treatment does not make every yarn equally resistant.

Shopping for one? See our guide: 6 Best Worsted Weight Acrylic Yarns for Crochet Projects (2026).

Three factors do most of the damage:

  • Hot water, especially above about 105°F (40°C), which softens the fiber.
  • High-heat drying, where a dryer or a hot iron can make the stitches pull in.
  • Tight tension during knitting, which leaves the fabric with little room to relax.

How to Test a Yarn for Shrinkage Before You Knit

A quick swatch test tells you more than any label. Knit a swatch of at least 4 inches square in the yarn and stitch you plan to use, then measure it. Wash it exactly as you would the finished project, dry it flat, and measure again. If the swatch has lost more than a small amount of width or length, expect the full project to change too.

Swatch test steps

  1. Knit a 4 x 4 inch swatch on the needles you plan to use, and mark the measurements with pins or waste yarn.
  2. Wash the swatch in lukewarm water with a mild, non-alkaline detergent.
  3. Lay it flat on a towel and let it dry without heat.
  4. Measure again and compare the results with your original numbers.

How to Keep Acrylic Yarn From Shrinking

If your swatch holds its size, the same handling steps will protect the finished project. Start with the wash water and move on to drying. Most shrinkage from acrylic is preventable, and it is far easier to avoid than to reverse.

Stage Safe approach Risky approach
Washing water Lukewarm or cool water Hot water
Agitation Gentle hand wash or delicate cycle Regular cycle with spin
Drying Lay flat, out of direct sun Tumble dryer or hot iron
Knitting tension Relaxed, even stitches Very tight stitches

For a deeper look at drying specifically, see Will Acrylic Yarn Shrink in the Dryer? Safe Drying Steps (2026). If you want to reverse a small amount of shrinkage intentionally, How to Shrink Acrylic Yarn: A Step-by-Step Guide for Knitters covers the process, though it is not something most knitters should attempt by accident.

Acrylic Blends and Shrinkage

Blended yarns behave differently from pure acrylic. A yarn that mixes acrylic with wool may shrink more readily because the wool fibers respond to heat and agitation. If you are unsure, check the fiber content and treat the yarn with the more sensitive fiber’s care rules. Yarn Acrylic Wool Blend: A Knitter's Guide to Choosing and Using It explains how blends are structured and what to expect when washing them.

  • A mild, pH-neutral wool and delicate wash, which protects acrylic from harsh cleaning agents: View on Amazon
  • Blocking mats with a grid, which let you lay items flat at accurate measurements while they dry: View on Amazon

Common Mistakes

  • Washing acrylic in hot water because the label says “machine washable.” Machine washable does not mean hot water is safe.
  • Drying a finished piece on a hot setting, even briefly.
  • Skipping the swatch and assuming a yarn will behave like the last one you used.
  • Stretching a damp piece to fit measurements. Gentle, even shaping works better.

FAQ

Will acrylic yarn shrink in cold water?

Cold water rarely causes noticeable shrinkage in acrylic. Heat is the main trigger, so cool or lukewarm water is the safer choice.

Can you fix acrylic that has already shrunk?

Sometimes you can gently reshape it while damp and let it dry flat. Severe shrinkage is hard to reverse, so prevention matters most.

Is acrylic better than wool for avoiding shrinkage?

Acrylic does not felt the way wool does, so it is usually more forgiving in the wash. It can still shrink or distort with heat, so the same care steps apply.

Conclusion

Acrylic yarn can shrink, but usually only when it meets heat, hard agitation or tight tension. A quick swatch test and gentle washing and drying will protect most projects. Handle your finished pieces with care and they will keep their shape for years.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our knitting guides, checking product details against manufacturer specifications and owner feedback.

About the author

Audrey Hayes
Audrey Hayes

Audrey Hayes writes reviews and buying guides for Passion Knit.