We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

How to Soften Acrylic Yarn Sweater: 6 Steps That Work

Learn how to soften acrylic yarn sweater knits with a gentle conditioning wash, drying tips and fiber-friendly care. Simple steps for a softer, cozier finished

Updated November 2026

To soften an acrylic yarn sweater, wash it in lukewarm water with a small amount of fabric softener or hair conditioner, rinse thoroughly, then dry it flat using a gentle, low-heat method. The goal is to relax the stiff, slightly waxy feel that acrylic often has right off the needles, without stretching or felting the knit. Most of the improvement comes from the wash itself, so the steps below focus on that.

Why Acrylic Sweaters Feel Stiff at First

Acrylic is a synthetic fiber, and many commercial yarns are finished with a light coating or spun tightly to hold up in shops and shipping. That finish can make a freshly finished sweater feel crisp or scratchy. Washing removes some of that residue and lets the fibers relax, which is why a sweater often feels noticeably softer after its first careful wash. For a deeper look at the material, see Is Acrylic Yarn Soft? Why It Varies and How to Get a Softer Knit.

Shopping for one? See our guide: 6 Best Anti Pilling Acrylic Yarns for Blankets and Sweaters (2026).

How to Soften an Acrylic Yarn Sweater Step by Step

  1. Fill a basin with lukewarm water, roughly 85°F to 95°F. Hot water can distort the knit.
  2. Add a small capful of fabric softener or a teaspoon of plain hair conditioner per gallon of water. Stir to dissolve.
  3. Submerge the sweater and press it gently for two to three minutes. Do not wring, twist or rub the fabric.
  4. Soak for 15 to 20 minutes, then drain and press out the water between towels.
  5. Rinse in clean lukewarm water until no suds remain, then press again.
  6. Lay the sweater flat on a dry towel, reshape it to its original measurements and let it air dry away from direct heat.

Choosing Between Fabric Softener and Conditioner

Fabric softener gives a noticeable slickness and works well for everyday sweaters. Hair conditioner is a gentler alternative if you want less residue on the fibers. Either way, use a small amount, because too much product can leave the knit feeling coated. For a dedicated walkthrough, read How to Soften Acrylic Yarn with Fabric Softener: A Step-by-Step Guide.

Drying and Reshaping for Best Results

Drying is where many sweaters lose their shape. Lay the sweater flat, not hung, because gravity stretches shoulders and cuffs. Use a towel rather than a rack so the weight doesn’t pull the knit. Expect a full dry to take 12 to 24 hours depending on thickness and room humidity. Keep the sweater out of the dryer, since heat can cause shrinkage and pilling. If you are worried about shrinkage in general, see Will Acrylic Yarn Shrink? How to Tell and Prevent It.

Common Mistakes to Avoid

  • Using hot water, which can shrink or misshape the knit.
  • Wringing or twisting the wet sweater instead of pressing it.
  • Adding too much softener, which can leave a greasy or coated feel.
  • Hanging the sweater to dry, which stretches it out of shape.
  • Machine drying on high heat, which can cause pilling and shrinkage.

A mesh wash bag helps protect knit details during soaking. View on Amazon

A set of thick bath towels makes it easier to press out water and support the wet sweater while it dries. View on Amazon

A gentle, dye-free liquid fabric softener suits sensitive skin and handmade knits. View on Amazon

FAQ

Can I soften an acrylic sweater without fabric softener?

Yes. A small amount of plain hair conditioner, diluted in lukewarm water, can soften acrylic fibers in a similar way. Rinse well so no residue remains.

How many times should I wash a new acrylic sweater to soften it?

Many knitters notice a clear improvement after one or two careful washes. Repeated washing can keep the fabric soft, but avoid overdoing it, since frequent washing can gradually reduce the sweater’s shape.

Will softening make my acrylic sweater pill more?

It shouldn’t if you wash gently and avoid heat. Pilling is more often caused by friction and machine drying than by a softening wash.

Conclusion

A soft acrylic sweater comes from a gentle wash with a small amount of softener or conditioner, followed by careful pressing and flat drying. Keep the water lukewarm, avoid wringing and dry the sweater on a towel. With those habits, your sweater will feel noticeably cozier and keep its shape for years.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our knitting guides, checking product details against manufacturer specifications and owner feedback.

About the author

Audrey Hayes
Audrey Hayes

Audrey Hayes writes reviews and buying guides for Passion Knit.