How to Curl Acrylic Yarn: A Step-by-Step Guide for Knitters
Learn how to curl acrylic yarn with steam, heat and tension methods. Get clean, springy curls for crochet, knitting and craft projects in this step-by-step guid
Updated November 2026
To curl acrylic yarn, you use a combination of heat, moisture and tension to set the fibers into a spiral shape. Acrylic is a synthetic fiber, so it holds a new shape well once it is heated and allowed to cool while stretched. This guide walks through the methods that work best and explains how to keep the curl even.
What You Need Before You Start
Gather a few basic supplies so the process goes smoothly and you don’t have to stop halfway through.
Shopping for one? See our guide: How to Tell If Yarn Is Wool or Acrylic: Quick Tests Compared.
- A length of acrylic yarn, cut to the length you want to curl
- A thin dowel, knitting needle or pencil to wrap the yarn around
- A steam source, such as a clothes steamer or a kettle with a spout
- Clothespins or small binder clips to hold the ends
- A dry towel and a flat surface
Method 1: Steam Setting the Curl
Steam is the most reliable way to set a curl in acrylic because it softens the fibers without scorching them.
- Wind the yarn tightly around a dowel or pencil in a neat spiral, keeping each loop touching the one beside it.
- Secure both ends with clothespins so the coil cannot unwind.
- Hold a steamer about 2 to 3 inches from the coil and steam for 15 to 30 seconds, moving slowly along its length.
- Let the yarn cool completely on the dowel, which usually takes 20 to 30 minutes, before you unwind it.
Cooling on the form is the step people most often skip. If you remove the yarn while it is still warm, the curl can relax.
Method 2: Heat Setting With a Hair Dryer or Iron
If you don’t have a steamer, a hair dryer on its hottest setting works for thin strands. Wind and secure the yarn as above, then move the dryer back and forth for about a minute. Keep it moving so one spot doesn’t overheat. An iron can also work, but place a damp cloth between the iron and the yarn and press briefly, never leaving the iron in place. Acrylic melts at high temperatures, so test on a short scrap first.
Method 3: Curling With Tension Alone
For a looser, decorative curl used in crafts such as gift wrap or embellishments, you can rely on tension rather than heat. Pull the yarn across the blade of a pair of scissors, pressing firmly along its length. The fibers will coil slightly. This curl is less permanent, so it works best for short-term decoration rather than items that will be washed or handled often.
Factors That Affect the Result
Several details change how well the curl holds. Thicker yarns need more steam time than fine ones. Tighter wraps produce tighter curls. A very slippery or highly plied yarn may need extra tension to keep its loops close. Acrylic blends that include other fibers may respond differently, so check the label before you apply heat. For more on how acrylic behaves when treated, see Will Acrylic Yarn Shrink? How to Tell and Prevent It.
Common Mistakes
- Using too much heat, which can flatten or melt the fibers.
- Unwinding the coil before it has fully cooled.
- Wrapping loosely, which leaves gaps and uneven curls.
- Skipping a test on a scrap length first.
- Expecting a steamed curl to survive heavy washing without loosening. Gentle washing is safer, as covered in Is Acrylic Yarn Washable? Yes, Here's How to Wash It Right.
Recommended Gear
A simple handheld clothes steamer makes steam setting even and controllable, and it is useful for many yarn tasks.
View on Amazon
A set of smooth wooden or metal dowels in several diameters lets you match the curl size to your project.
View on Amazon
FAQ
Will the curl last after washing?
A well-set curl holds through gentle hand washing, though heavy agitation or wringing can loosen it. Lay the yarn flat to dry for the best results.
Can I curl acrylic yarn without a steamer?
Yes. A hair dryer on high heat or a damp cloth with a light iron press can set the curl, but move carefully to avoid melting the fibers.
Why does my curl keep springing back?
The yarn probably didn’t cool while it was held in shape, or it wasn’t heated long enough. Re-wind it, steam again, and let it cool fully on the form.
Conclusion
Steam setting on a dowel is the most dependable way to curl acrylic yarn, and it gives tidy, lasting results. Use heat gently, let the yarn cool completely, and test on a scrap first. With these habits, your curls will stay springy for whatever project comes next.
Related reading
- Worsted Weight 4 Acrylic Yarn: How to Choose and Use It (Beginner Guide)
- The Women's Institute Premium Acrylic Yarn: What It Is and How to Use It
- Super Fine Acrylic Yarn: What It Is and How to Knit With It
Ready to choose one?
